IRIS POWER

Condition Based Maintenance of Turbo-Generators

April 8, 2021 Virtual

$150.00 USD

Please join us for our first Virtual Training Course on Condition Based Maintenance of Turbo-Generators.
The course is designed for engineering and maintenance personnel who either purchase, install, test, maintain and/or repair motors and/or generators. Consultants, manufacturers and repair shop personnel would also benefit from this course. The course is mainly intended for those involved with motors or generators rated 3kV and above.

The Course will run  North American Eastern Standard Time (EST) from 10:00 AM to 3:00 PM with a break from 12:00 PM to 1:00 PM

Cost: $150.00 USD

Agenda
  • Winding inspection and offline testing in preventive maintenance
  • Typical winding repairs
  • Time for a rewind?
  • What your spec needs to include.

Register Here

Instructor: Greg Stone

Dr. Greg Stone was one of the developers of on-line partial discharge test methods to evaluate the condition of the high voltage insulation in stator windings. From 1975 to 1990 he was a Dielectrics Engineer with Ontario Hydro, a large Canadian power generation company. Since 1990, Dr. Stone has been employed at Iris Power L.P. in Toronto Canada, a motor and generator condition monitoring company he helped to form. He has published two books and >200 papers concerned with rotating machine windings. He has awards from the IEEE, Cigre and IEC for his technical contributions to rotating machine assessment. Greg Stone has a BASc, MASc and PhD in Electrical Engineering from the University of Waterloo (Canada), is a Fellow of the IEEE. He is a registered professional engineer in the Province of Ontario, Canada.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

COURSES & TRAINING

Hands-on, practical experience

BROWSE OUR COURSES

Virtual 2021 Iris Rotating Machine Conference June 22 - 24, 2021 -

Virtual 2021 Iris Rotating Machine Conference
LEARN MORE