IRIS POWER

New Date – Partial Discharge Course – Manchester, UK

New date - May 11-13, 2021 Manchester, UK

Costs: $1295 USD

About the Course

Due to travel restrictions and the ongoing situation with COVID-19 a decision has been made to postpone the PD Course until May 11-13, 2021. If you have any questions, please feel free to contact us.

The objective of this Partial Discharge Seminar is to understand basic PD theory as well as stator winding insulation systems and why they deteriorate. To learn how PD detection devices work and interpret the test data collected and relate the data to specific failure mechanisms, to enable you to plan stator winding maintenance.

The course is designed for engineering and maintenance personnel who either purchase, install, test, maintain and/or repair motors and/or generators. Consultants, manufacturers and repair shop personnel would also benefit from this course. The course is mainly intended for those involved with motors or generators rated 3kV and above.

Topics covered in this course include:

Motor & Generator Stator Windings

PD Theory

PD Detection

Interpreting Test Results

Instructor:

Dr. Howard Sedding graduated with a BSc in electrical and electronic engineering at the University of Strathclyde and then acquired MSc and PhD degrees.  Most of Dr. Sedding’s career was spent working at the Research Division of Ontario Hydro, later known as Kinectrics. Howard was involved in, or responsible for, numerous projects related to the specification, testing, monitoring and maintenance of solid, liquid and gaseous electrical insulation systems in a wide range of high voltage electrical equipment.  He is an active member of numerous technical committees, and has contributed to many IEEE and IEC standards concerned with electrical insulation.  Specifically, he is the Chair of the Canadian committee for IEC TC112 (Evaluation and qualification of electrical insulating materials and systems), the International Secretary of IEC TC42 (High voltage and high current test techniques) and is the Canadian representative for Cigre SC A1 (rotating machines). Howard has authored and co-authored more than 150 technical papers. Currently, Howard is employed as an Insulation Engineer at Iris Power

 

Course hours:

Cost $1295.00 US
Registration includes  lunch and coffee breaks daily and a complete set of notes
Price does not include accommodation
15 Seats Available

Venue:

DoubleTree by Hilton Hotel
Manchester-Piccadilly
One Piccadilly Place,
1 Auburn Street,
Manchester, M1 3DG
Tel: +44 161 24210000

 

Register on-line below or download registration form 

For more information contact Karen Howard, khoward@qualitrolcorp.com, + 1 905-364-4568

Register Now

Call us at +1 905.677.4824, email us at sales.iris@qualitrolcorp.com, or fill out the registration form below.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

COURSES & TRAINING

Hands-on, practical experience

New Date – Partial Discharge Course – Denver, CO

The objective of this Partial Discharge Seminar is to understand basic PD theory as well as the basics of stator…

BROWSE OUR COURSES

POSTPONED TO 2021 Iris Rotating Machine Conference June 21 - 24, 2021 - Renaissance Hotel | Las Vegas

POSTPONED TO 2021 Iris Rotating Machine Conference
LEARN MORE