Shaft Voltages and Currents Monitoring Course

Please join us for our virtual training course on “Shaft Voltages and Currents Monitoring”.

The course is designed for engineering and maintenance personnel who either purchase, install, test, maintain and/or repair motors and/or generators. Consultants, manufacturers and repair shop personnel would also benefit from this course. The course is mainly intended for those involved with motors or generators rated 3kV and above.

The Course will run North American Eastern Standard Time (EST) from 10:00 AM to 3:00 PM with a break from 12:00 PM to 1:00 PM

Cost: $150.00 USD

Agenda

Causes of unwanted shaft voltages and currents in generators and turbines
Methods for controlling and measurement of shaft voltages and currents

Register Here

Instructor: Mladen Sasic

Mladen Sasic has more than thirty years of international experience in design, production, installation, testing and maintenance of Power generation, transmission and distribution equipment. He obtained a Bachelor of Science in Electrical Engineering-Electrical Power Engineering degree from the University of Sarajevo. Mladen is a member of the Association of Professional Engineers of Ontario, Canada, as well as a member of IEEE, CSA Technical Subcommittee on Safety Requirements for Electric Equipment for Measurement Control. He has contributed to Handbook of Electrical Motors and has co-authored and presented more than 30 technical papers at various international conferences. Mladen was elected a Fellow of the IEEE in 2021.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

RESOURCE LIBRARY

Articles, Technical Papers, & Case Studies

Results of Destructive Analysis of Service-Aged Hydrogenerator Stator Winding Insulation

BROWSE OUR RESOURCE LIBRARY

COURSES & TRAINING

Hands-on, practical experience

Condition Based Maintenance of Turbo-Generators

Please join us for our virtual training course “Condition Based Maintenance of Turbo-Generators”. The course is designed for engineering and…

BROWSE OUR COURSES

Virtual 2021 Iris Rotating Machine Conference June 22 - 24, 2021 -

Virtual 2021 Iris Rotating Machine Conference

LEARN MORE

About Iris Power

Iris Power, founded in 1990, offers sensors, monitors and diagnostic solutions for the assessment of the actual state of generators, motors, dry-type transformers and air-insulated switchgear, so that the risk assessed and the necessary maintenance can be planned. In 2010 Iris Power LP was acquired by Qualitrol Corporation, a global leader for condition-based monitoring.

Head Office

IRIS Power LP
3110 American Drive
Mississauga, Ontario
L4V 1T2 CANADA

Telephone: +1-905-677-4824
Toll Free: +1-888-873-4747
Fax: +1-905-677-8498

Contact Us

SITE BY: SNAP360