IRIS POWER

Stator Winding Partial Discharge Theory

May 20, 2021 - 12:00 PM to 5:00 PM Central European Summer Time (CEST) Virtual

$150.00 USD

Please join us for our first Virtual Training Course on Stator Winding Partial Discharge Theory.
The course is designed for engineering and maintenance personnel who either purchase, install, test, maintain and/or repair motors and/or generators. Consultants, manufacturers and repair shop personnel would also benefit from this course. The course is mainly intended for those involved with motors or generators rated 3kV and above.

The Course will run from 12:00 PM to 5:00 PM with a break from 2:00 PM to 3:00 PM CEST (Central European summer Time)

Cost: $150.00 USD

Agenda
  • Partial discharge phenomena and their causes in stator windings
  • PD theory
  • PD detection
  • Sensor installation
  • Calibration procedures

Register Here

Instructor: Howard Sedding

Dr. Howard Sedding graduated with a BSc in electrical and electronic engineering at the University of Strathclyde and then acquired MSc and PhD degrees.  Most of Dr. Sedding’s career was spent working at the Research Division of Ontario Hydro, later known as Kinectrics. Howard was involved in, or responsible for, numerous projects related to the specification, testing, monitoring and maintenance of solid, liquid and gaseous electrical insulation systems in a wide range of high voltage electrical equipment.  He is an active member of numerous technical committees, and has contributed to many IEEE and IEC standards concerned with electrical insulation.  Specifically, he is the Chair of the Canadian committee for IEC TC112 (Evaluation and qualification of electrical insulating materials and systems), the International Secretary of IEC TC42 (High voltage and high current test techniques) and is a Special Reporter  for Cigre SC A1 (rotating machines). Howard has authored and co-authored more than 150 technical papers. Currently, Howard is employed as an Insulation Engineer at Iris Power.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

COURSES & TRAINING

Hands-on, practical experience

BROWSE OUR COURSES

Virtual 2021 Iris Rotating Machine Conference June 22 - 24, 2021 -

Virtual 2021 Iris Rotating Machine Conference
LEARN MORE