CoDis – Vibration Monitoring

Continuous Shaft and Bearing Vibration Monitoring

Product Overview

Continuous Online monitoring system and diagnostic software for bearing and shaft vibrations on generators and motors.

Download Brochure (Turbo Generator) Download Brochure (Hydro Generator)
Works with the Following Assets
Assists with the Following Type of Monitoring

The CoDiS system is a continuous online condition based monitoring system for vibration in generators and motors.  Monitoring and diagnostic capabilities of shaft and bearing vibration are also evaluated electrical parameters and process parameters including temperatures, pressures and flow.

The system is based on open software architecture which enables flexible configuration of the system to facilitate customization and future upgrades.


Product Details




The CoDis system provides early warning, real time protection and information for predictive maintenance of motors and generators including:

  • Alarming System
  • Electrical Transient Recorder and Power Quality Monitoring
  • Integrative software module for diagnostic monitoring (CoDiS DM). Each of the modules can be installed as an individual system

Data Acquisition

CoDiS continuous online monitor is designed for recommended measurement layout with analog input channels that can be configured for:

  • Trigger Signal
  • Relative Shaft Vibration Signals
  • Absolute Bearing Bracket Vibration Signals
  • Axial Displacement  Signals
  • Electrical and Process Parameters

Data Analysis

The CoDis diagnostic software is capable of the following:

  • Configurable channel sensitivity and offset to adjust for different sensors
  • History trend analysis
  • Analysis of waveform (raw) data acquired on-line or off-line from an ASCII file
  • Spectra calculation (FFT and Waterfall)
  • Ability to store condition vector data (the most relevant parameters calculated from waveforms) to ASCII file
  • Orbit analysis with compensation for different sensor position in different measurement planes
  • Data plotting including  Bode plot, Nyquist plot and Shaft centerline plot
  • Slow-roll module enabling data analysis down to very low rotational speeds (below 5 rpm)
  • Analysis of any data over shared network through TCP/IP


Optional modules for the portable CoDis vibration monitoring unit includes:

  • Air-gap and magnetic field analysis  is available to provide analysis of pole profile, stator and rotor shape and shorted turns on rotor poles
  • 3D Run Out module
  •  Critical speed/ bearing stiffness module
  • Connection of process quantities
  • Statistical analysis of recorded data (histograms)

Get a Quote

Call us at +1 905.677.4824 or Toll Free at +1 888-873-4747 or fill out our online quote form below.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.


Articles, Technical Papers, & Case Studies

Stator End-Winding Vibration in Two-Pole Machines – Avoiding Generator Failure

IN THE PAST 15 YEARS, INSURANCE INDUSTRY DATA HAVE indicated that stator end-winding vibration has become the most important ...



Hands-on, practical experience

EL CID Training | Electromagnetic Core Imperfection Detection – October 1-3, 2024 – Iris Power, Toronto, Canada

Reasons to Take The Course Mechanical, electrical and environmental stresses can cause a breakdown in the inter-laminar insulation on Stator Core…


IRMC 2024 June 17-20, 2024 - Renaissance Las Vegas, Las Vegas NV

IRMC 2024

Looking for more Information

Sign up to receive our latest whitepapers, webinars, new product information, product updates and more.