IRIS POWER

FluxTracII-S 4208 – Rotor Flux Monitoring (Motors and Generators)

Continuous Online Rotor Magnetic Flux Monitoring on Salient Pole Machines

Product Overview

The FluxTracII-S 4208 is continuous monitor to collect and analyze flux data from any flux probe in real time, providing the user with data on rotor winding shorted turns.

Download Brochure
Works with the Following Assets
Assists with the Following Type of Monitoring

Flux monitoring identifies shorted rotor turns through the measurement of the local magnetic field emanated from each rotor pole to identify:

Product Details

Features

Data Acquisition

  • Ideally used with permanently installed Iris Power Total Flux Probe (TFProbe) or Folding Flux Probe (FFProbe).
  • Inputs for shaft sync sensor (Keyphasor) for pole determination when shorts are detected.
  • Monitors up to four machines with 4 to 128 poles per machine.
  • Custom built, ultra-high resolution digital data acquisition module, including on-board switchable attenuation for maximum resolution  measurements  using virtually any flux probe.

Data Analysis

  • The FluxTracII-S 4208 and RotorFluxPro software provides instant analysis to indicate the presence and location any rotor poles with shorted turns .

  • Analyzing the voltage waveforms in real time, comparing average and discrete flux readings, and trending readings to identify anomalies in the flux due to shorted turns.

  • High speed acquisition capability creates a table of results covering each pole and each load point.

Communication

  • The FluxTracII-S 4208 can operate “stand alone” system with only periodic downloading of archived data or it can be networked into the plant control system for remote data acquisition and analysis through USB, Ethernet or Modbus.
  • An alert output using a dedicated relay can activate a remote indicator of shorted turns. The alert output may also be connected to a plant monitoring system.

Get a Quote

Call us at +1 905.677.4824 or Toll Free at +1 888-873-4747 or fill out our online quote form below.

Learning Center

This Resource Library is designed to provide current, relevant resources that provide technical knowledge and practical solutions for owners and operators of rotating machines. We encourage you to use the search feature and filters to locate specific resources of interest.

RESOURCE LIBRARY

Articles, Technical Papers, & Case Studies

Stator End-Winding Vibration in Two-Pole Machines – Avoiding Generator Failure

IN THE PAST 15 YEARS, INSURANCE INDUSTRY DATA HAVE indicated that stator end-winding vibration has become the most important ...

BROWSE OUR RESOURCE LIBRARY

COURSES & TRAINING

Hands-on, practical experience

EL CID Training | Electromagnetic Core Imperfection Detection – October 1-3, 2024 – Iris Power, Toronto, Canada

Reasons to Take The Course Mechanical, electrical and environmental stresses can cause a breakdown in the inter-laminar insulation on Stator Core…

BROWSE OUR COURSES

IRMC 2024 June 17-20, 2024 - Renaissance Las Vegas, Las Vegas NV

IRMC 2024
LEARN MORE

Looking for more Information

Sign up to receive our latest whitepapers, webinars, new product information, product updates and more.